Measurements in the Stratosphere
ENVIRONMENTAL SCIENCE PUBLISHED FOR EVERYBODY ROUND THE EARTH
The stratosphere begins at an altitude of between 8 and 15 km and the interesting regions are higher than normal planes can fly. So how do we know about the chemistry of the stratosphere?
In order to study the chemistry of the stratosphere we can either:
- send measurement instruments into the stratosphere on special aircraft or on balloons.
- use the characteristic way in which a specific chemical compound interacts with light to study the stratosphere from the ground or from space using satellites.
Unique measurements have been made possible with special aeroplanes, such as the former Russian high altitude spy plane. This plane, now called "Geophysica", has been converted into an airborne laboratory and such planes can reach altitudes of around 20 km. The flights are very expensive and, as a result, this method is not used often.
1. Geophysica - high altitude research aircraft.
source: MDB Design Bureau
A more common alternative is to take measurements using meteorological balloons. Weather balloons can reach altitudes of between 30 and 35 km before they burst. They carry sensors to measure, for example, ozone and send the information back to Earth via a radio signal. As the balloon travels up through the air it sends continuous information back to Earth. Balloons are, therefore, a very useful and relatively inexpensive way of finding out about the vertical structure of the atmosphere.
2. a) Start of an ozone balloon ascent at Hohenpeissenberg Observatory, Germany.
Photo courtesy of Ulf Köhler.
2. b) Ozone probe for balloon measurements.
Photo courtesy of Ulf Köhler, DWD Hohenpeissenberg.
2. c) Closer look at the photo number 2.
Photo courtesy of Ulf Köhler, DWD Hohenpeissenberg.
Interaction of molecules with light
The way in which different chemicals interact with light is really complicated. In very simple terms, something happens when light and matter interact. The light can be absorbed completely by the compound. It can be reflected or scattered directly back into space or can be taken up and re-emitted at a different energy (as a different wavelength).
Its easy to see the impact of light absorption by clouds, water and large particles- direct sunlight is blocked by clouds, as we dive into the sea it becomes darker as more light is lost and a dust storm makes the sun look pale. Smaller molecules do the same. They can also absorb or reflect light, they can scatter the light back to Earth or absorb the light and re-emit less energetic light of a different wavelength. Examples of this are phosphorescence and fluorescence. These effects happen when chemicals take up daylight and emit different energy light which we can see in the dark. The sort of light re-emitted tells us something about the type of chemical and the intensity of the light tells us something about its concentration.
3. Phosphorescence takes place if light is absorbed and reemitted again at an other wavelength.
source: composed from web-advertisements.
Interaction of light with molecules in the stratosphere can be observed from the ground or measured from space using instruments mounted on satellites.
Lidar (LIght Detection And Ranging) is one technique which can be used from the ground. A short pulse of very intensive laser light is sent into the sky. After a while, light returns to Earth and is measured.
4. LIDAR measurements.
source: University of Western Ontario.
This light gives us information about the compounds in the atmosphere (from the wavelength of the returning light) and at what concentration they occur (the intensity of the returning light). But how do we know how high up in the atmosphere these compounds are? Light has a certain velocity and the longer the light takes to come back to Earth, the higher the compounds are.
The animation on the left shows a laser pulse whose light is scattered back to Earth at different altitudes by air molecules and arrives at the detector at different times.
5. How does a LIDAR work?
Animation: Anja Kaiser © ESPERE
RADAR and SODAR
Different variations of the wave detection and ranging technique can also be used. The best known is RADAR (RAdio Detection And Ranging), which is used to measure particles in the air and the properties of clouds. RADAR allows us to track thunderstorms over several hundred kilometers. If sound is used instead of light, the technique is known as SODAR (SOund Detection And Ranging) and this gives us a powerful tool for the measurements of wind speed and direction.
6. SODAR - wind speed measurements.
picture source: Meteotest
Satellites observe our planet from space. Some of them observe just one area of the Earth and are known as geostationary satellites whereas others orbit the Earth at an altitude of between 500 and 1000 km and can circle the Earth in about 1.5 to 2 hours. Some of these satellites have instruments known as spectrometers aboard and these can detect different wavelengths of light and give us information on the chemical composition of the atmosphere.
- Using satellites we can measure the amount of sunlight scattered by clouds or air molecules.
- Satellites can carry spectrometers which work in the infra-red region of the spectrum and measure long wave radiation coming directly from the Earth.
- For certain positions of the Sun and the Earth, sunbeams pass through just air to the detector on the satellite. This can give us information on how concentrations of different molecules change throughout the atmosphere.
7. Different techniques of satellite measurements.
scheme by Elmar Uherek.
About this page:
author: Dr. Elmar Uherek - Max Planck Institute for Chemistry, Mainz, Germany
scientific reviewer: Dr. John Cowley - Max Planck Institute for Chemistry, Mainz - 2004-05-04
educational proofreading: Michael Seesing - Uni Duisburg, Germany - 2003-07-02
last published: 2004-05-05